25 Linux Server Hardening Tips

linux securityWhen it comes to having a Linux server hosted in a data center or it is not behind any kind of Firewall or NAT device there are a number of security requirements that need to be addressed. Linux servers generally come with no protection configured by default and depending on the hosting company or distro can come preconfigured with many services installed that are not required, including Web Servers, FTP Servers, Mail Servers and SSH Remote Access.

The following is a compilation of various settings and techniques you can employ to harden the security of your vulnerable Linux systems. While I have tried to put them in order of the most important features first I would recommend all of these options be used on your critical production servers.

TIP #1 – Strong Passwords

Always create long passwords that contain upper and lower case letters, numbers and non alpha-numeric characters. Enforce password ageing so users need to change their passwords regularly. Lock user accounts after a certain number of failed login attempts.

TIP #2 – Use Public/Private Keys

Make use of Public/Private SSH keys for login of remote users instead of passwords, this provides the benefit of turning off password authentication in SSH so that your server can’t be Brute-Force cracked. However this does introduce a new problem whereby a malicious person could compromise a user’s computer or steal their laptop and then have access to the server. This can be overcome by using a password on the client certificate which must be entered before connecting, a kind of two factor authentication.

TIP #3 – Disable Root Login

Disable the Root user from being able to login either via the console or remote SSH connections. Instead have users use Sudo to run programs that require root privileges, or use sudo su to change to the Root user once logged in. This provides an audit path to show which user installed a piece of software or ran a program.

TIP #4 – Use Encrypted Traffic

Always use the encrypted equivalent protocol when transferring critical and sensitive data such as passwords and confidential material. Remove RSH and always use SSH for remote access. Instead of using FTP for file transfer, consider using SFTP or FTP/S (FTP over SSL) or RSYNC. Instead of having remote access open to the internet i.e. SSH or VNC setup an OpenVPN SSL VPN Server to connect to first.

TIP #6 – Use Centralized Password Server

Consider implementing either a LDAP or Kerebos server to perform password authentication. This allows for a central database to maintain user’s passwords between multiple servers for easy management. This prevents user account and password data from becoming inconsistent and out of date, and prevents user accounts that should have been deleted on all servers being left behind on one server.

TIP #7 – Use IPTABLES Firewall/TCP Wrapper

Implementing a secure IPTABLES firewall will limit your exposure to network threats such as DOS and Port Scanning attacks. You can lock down any ports that don’t require access from external networks. For instance you can use the following command to only allow SSH access to the server from the local network.

# iptables –A INPUT –s –p tcp –dport 22 –j ACCEPT

You can install a TCP Wrapper named libwrap which will give information like who connected, when and from where and even which services they connected to. It can also be used for locking down access to ports and services for certain hosts or IP’s.

TIP #8 – Use Intrusion Detection Systems

Consider installing both a Network IDS (NIDS) and a Host Based IDS (HIDS). NIDS’s are used to protect against malicious threats such as DOS and Port Scan Attacks. HIDS’s such as AIDE are used to monitor file system changes such as an intruder replacing core system files like ls or ps with malicious ones that hide their Trojan from file or process lists. It will produce a report that tells you what files have been modified so you can repair or replace them.

TIP #9 – Users Assigned Least Privileges

Disable Shell access to users that don’t need it (ftp, mail users etc) by changing to /bin/noshell in the /etc/passwd file. Setup a group for standard users and remove permissions to tools that can be used to download malicious software like wget, lynx, ftp etc. Consider chrooting users to their home directories to stop them from modifying critical system files.

TIP #10 – Minimize Software

Only install software that is actually needed, some systems come preconfigured with many software packages that you may never need or use. When installing always choose the Minimal Installation or Manual Installation option if they exist. Then simply install the software that you actually need.

TIP #11 – Keep Software Updated

Always try to keep your software packages up to date, such as ensuring the latest version of Apache, MySQL and PHP on a standard LAMP setup will protect you against any vulnerabilities that have been discovered in previous versions.

TIP #12 – Disable Unwanted Services

Your servers will most likely have many background services (Daemons) running which are not required and some may be configured to run on start-up. The following command (Red Hat, Cent OS only) can be used to show all services that will start on boot.

# chkconfig --list | grep : on

Or just use the following command to view services which are turned on only for Run Level 3.

# chkconfig --list | grep 3:on

You would then use a command like this to remove the service from start-up.

# chkconfig --del ‘service-name’

TIP #13 – Remove X Windows

Consider completely removing X Windows from the system and just using the command line for management. There isn’t anything that you can do in the GUI that you can’t do using the command line and removing it will not only enhance security but also performance because no system resources are wasted displaying the GUI.

TIP #14 – Secure Linux Kernel

You can secure your Linux Kernel by modifying the /etc/sysctl.conf file, this file is read by the Kernel at boot time and can be edited with the following settings to add extra security.

# Turn on execshield
kernel.exec-shield = 1
kernel.randomize_va_space = 1
# Don't reply to broadcasts. Prevents joining a smurf attack
net.ipv4.icmp_echo_ignore_broadcasts = 1
# Enable protection for bad icmp error messages
net.ipv4.icmp_ignore_bogus_error_responses = 1
# Enable syncookies for SYN flood attack protection
net.ipv4.tcp_syncookies = 1
# Enable IP spoofing protection
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
# Log spoofed, source routed, and redirect packets
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.log_martians = 1
# Don't allow source routed packets
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
# Don't allow outsiders to alter the routing tables
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
# Don't pass traffic between networks or act as a router
net.ipv4.ip_forward = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0

TIP #15 – Install Linux Kernel Patches

You should have a written security policy for handling Linux Kernel Patches, which should include which Linux security notices have been received, which updates have been tested to ensure problems don’t arise and which patches have been installed on the system. Always ensure Production servers are updated regularly to avoid any potential known vulnerability from being exploited on your system.

TIP #16 – Separate Partitions

You should create separate partitions for user modifiable directories and block write and execute access to unneeded partitions. You should consider placing the following file systems on different partitions.
/var and /var/tmp

Then you can edit the /etc/fstab file to prevent execution of binary files, disable block devices on the partition and prevent the SUID/SGID from being set on files. Here is a common fstab file entry to limit user access to the ftpdata directory.

/dev/sda5  /ftpdata  ext3    defaults,noexec,nodev,nosuid 1 2

TIP #17 – Use Linux Security Extensions

Make use of software like SELinux, AppArmor or GRSecurity to provide additional hardening to your Linux Kernel. These products provide additional policies to restrict processes and services based on Access Control Lists.

TIP #18 – Separate Servers for Services

Consider setting up different physical or virtual servers for different roles, i.e. separate your Mail server and your Webserver, or your Database server and your Application server. This ensures that if one particular service is compromised it is contained to just one server.

TIP #19 – Physical Server Security

You can secure your server as much as possible from remote attacks, but if you don’t do anything to protect the physical hardware it is pointless. If someone has access to your physical server they can remove your hard drive and read your confidential data or boot from a CD and access your data. Consider creating a BIOS password and disabling booting from CD or USB. Also you should password protect your boot loader (GRUB, LILO, etc) to prevent users from accessing Single User Mode or Recovery Environments where passwords are not required.

TIP #20 – Setup NTP

Having an accurate system clock is important for reviewing log files and determining when an event occurred. Often system clocks can become out of sync or be reset to an older date and this can cause havoc with tracking of errors. Consider creating a Cron job rather than running ntpd (See Tip #12) to update the time daily or hourly with a common source for all servers.

TIP #21 – Monitor All Logs

Setup logging and auditing software to track errors and changes to your servers, such as Auditd and Logwatch/Logcheck. Consider configuring a remote logging server that is updated regularly to protect against an intruder compromising your log files without your knowledge.

TIP #22 – Disable IPv6

IPv6 is very rarely needed at this stage as most traffic only utilizes IPv4 and having IPV6 enabled is just another network you need to monitor and protect. Disabling IPv6 is the easiest option but if for some reason you do require it then you should configure an IPv6 Firewall.

TIP #23 – Remove SUID and SGID from Files

After you have setup and configured your system and software you should run the following commands to search for all file and folders with either the SUID, SGID bit set or world writeable folders.
To find all SUID files:

# find / -xdev -type f -perm +u=s –print

To find all SGID files:

# find / -xdev -type f -perm +g=s -print

To find all World Writeable Dirs:

# find / -xdev -perm +o=w ! \( -type d -perm +o=t \) ! -type l -print

You should then inspect each file and folder to determine if they have the correct settings and if not use the chmod command to make changes to them.

TIP #24 – Encrypt Confidential Data

Your data is usually stored on a hard drive in an unencrypted format so any user that has access to the server can remove the hard drive and install it in another system and read all your data. You should consider configuring Linux disk or folder encryption on either your home directories or your sensitive folders (i.e. Database Files, Emails, etc). While you could encrypt your entire drive this is a lot of work and may not be worth the hassle.

TIP #25 – Harden Your Software

It is great to have a highly secure Linux server but your system is only secure as the software you run on it. You should always install the latest versions of software and ensure they stay up to date. Also most programs have ways to make them more secure by editing their configuration files and disabling unnecessary parts of the software. The following is an example for hardening your OpenSSH Server settings, simply add the following  to your OpenSSH config file.

# Use only SSH Protocol Ver 2
Protocol 2
# Only allow the following users SSH Access
AllowUsers User1 User2 etc
# Deny access to the following users
DenyUsers admin etc
# Set the timeout period for idle sessions (in seconds)
ClientAliveInterval 300
ClientAliveCountMax 0
# Disable .rhosts files
IgnoreRhosts yes
# Disable Host-Based Authentication
HostbasedAuthentication no
# Remove ability to login as Root
PermitRootLogin no
# Change the default SSH Port (Not essential but can help uncomment if you want)
#Port 22
# Consider CHRooting users to their own directories.
# Subsystem sftp internal-sftp
#Match group sftponly
#         ChrootDirectory /home/%u
#         X11Forwarding no
#         AllowTcpForwarding no
#         ForceCommand internal-sftp
# Disable empty passwords from login
PermitEmptyPasswords no
# Set your required Log Level (Either INFO or DEBUG)
LogLevel INFO
#  Turn on privilege separation
UsePrivilegeSeparation yes
# Prevent the use of insecure home directory and key file permissions
StrictModes yes
# Turn on  reverse name checking
VerifyReverseMapping yes
# Do you need port forwarding?
AllowTcpForwarding no
X11Forwarding no
#  Specifies whether password authentication is allowed.  The default is yes.
PasswordAuthentication no

Monitis is an all-in-one hosted monitoring platform for small and medium-sized businesses. 70,000+ IT pros use Monitis products to monitor health and performance of over 300,000 sites.

You might also like